Comtech EF Data CDM-625A, Installation And Operation Manual

Page: 250 / 756

CDM-625A Advanced Satellite Modem MN-CDM625A
Ethernet-based Remote Product Management Revision 4
7–20
7.5.4.2.4 Admin | Reboot
Use this page to perform a soft reboot of the CDM-625A using the current, active firmware
Image
as selected on the ‘
Admin | Firmware | Base Modem
’ page
(Sect. 7.5.4.2.3.1)
and/or the
‘ Admin | Firmware | Packet Processor ’ page ( Sect. 7.5.4.2.3.2 ).
Figure 7-8. Status | Firmware Info | Reboot page
Click
[Reboot Now]
to perform the soft reboot of the CDM-625A. The page updates to indicate
the reboot in progress as follows:
Depending on the number of installed hardware and firmware options, it may take up to one
minute for soft reboot to execute. Once the CDM-625A “splash” screen appears, you must log in
to begin a new HTTP Interface session:
1) Click [OK] on the ‘ Rebooting ’ page to complete the reboot process.
2) Upon reboot, you will need to refresh your browser window. Once the Login window
appears, type in your User name and Password .
3) Click
[OK]
in the Login window; the browser window will refresh to show the HTTP Interface
“splash” (Home) page.
4) Select any navigation tab to resume your session.