CDD-562AL/564A/L Multi-Channel Demodulator
Revision 0
Telnet and CLI Operation
MN-CDD562AL564AL
9–42
Codecast Multicast Address
, keystroke:
M
•
Configures the IP Multicast Address for the Codecast protocol.
o
Format aaa.bbb.ccc.ddd
o
Range for aaa: 224 through 239
•
The IP Module can install the firmware updates on multiple units using the Codecast protocol.
This makes upgrading units easier in bigger networks.
PARAM Image
, keystroke:
C
•
Identifies the PARAM file that is loaded on bootup.
o
1=Factory – Uses the internal, hard-coded factory default parameters.
o
2=PARAM – Last saved Parameter file.
Statistics
, keystroke:
T
•
Opens the Statistics Menu.
•
See Section 9.2.2.7.2.
Event Log
, keystroke:
E
•
Opens the Event Log screen.
•
See Section 9.2.2.7.3.
Database Operations
, keystroke:
D
•
Opens the administrative Database Operations screen.
•
See Section 9.2.2.7.4.
Reset
, keystroke:
R
•
Reboots the Unit. This has the same effect as stopping and starting power for the unit.
Diagnostics
, keystroke:
G
•
Opens the Diagnostics screen.
•
See Section 9.2.2.7.5.
M&C Interface
, keystroke:
F
•
Gives you access to the demodulator’s available remote commands and queries.
•
Once the M&C Interface is selected, a Controller-to-Target remote command or query takes this
form at the ‘
#
’ prompt:
o
Start of Packet ‘<’
o
Address Delimiter ‘/’
o
Target Address (1-4 characters, 0001 – 0004)
o
3-character Instruction Code (e.g., RFQ)
o
Instruction Code Qualifier – Command ‘=’ or Query ‘?’
•
Example: M&C CLI INTERFACE
o
(X=Exit) #<1/RFQ?
Summary of Contents for CDD-562AL
