Comtech EF Data CDD-562AL, Installation And Operation Manual

Page: 133 / 244

CDD-562AL/564A/L Multi-Channel Demodulator Revision 0
Telnet and CLI Operation MN-CDD562AL564AL
9–27
9.2.2.4.3 (VLAN) Brouter screen
Go to the Brouter Configuration screen from the Protocol Configuration screen.
VLAN Brouter Mode , keystroke: B
•
Requirement: Header Decompression must be purchased and available
•
Switches between [Disabled] or [Enabled]
•
[Enabled] causes VLAN tagged packets to be forwarded when in Router mode
VLAN Brouter Next Hop MAC , keystroke: N
•
Enter a Next Hop MAC address in 01-02-03-04-05-06 format.
VLAN Brouter Remote Mode Enable , keystroke: R
•
Switches between [Disabled] or [Enabled]
•
If [Enabled] , IP traffic received from the WAN interface is not forwarded back to the WAN
interface, even though the route table matches.
VLAN Filtering , keystroke: F
•
Switches between [Disabled] or [Enabled]
•
If [ Enabled] , allows:
o
Filtering of "Brouted" Packets:

Bridging of VLAN destination packets

Routing of non-VLAN traffic using static route table information
VLAN ID 1 through VLAN ID 10 , keystrokes: 1 through 9 , A for 10
•
Enter a valid ID in the range of 0000 to 4095.