Comtech EF Data CDD-562AL, Installation And Operation Manual

Page: 170 / 244

CDD-562AL/564A/L Multi-Channel Demodulator Revision 0
Telnet and CLI Operation MN-CDD562AL564AL
9–64
Dump Packets received by Router , keystroke: B
•
Is not applicable when in easyConnect

mode.
•
Switches between [Yes] or [No] .
•
[Yes] causes the IP Module to dump a hexadecimal representation of each packet that is received
by the routing engine.
•
[No] stops a packet dump in progress.
Dump Packets sent to EndStation , keystroke: G
•
Switches between [Yes] or [No] .
•
[Yes] causes the IP Module to dump a hexadecimal representation of each packet that is received
or destined for the demodulator only.
•
[No] stops a packet dump in progress.
Dump Packets received from EndStation , keystroke: H
•
Do this to see what type of packets this unit generates internally.
•
Switches between [Yes] or [No] .
•
[Yes] causes the IP Module to dump a hexadecimal representation of each packet that is sourced
from this unit and destined for some other device.
•
[No] stops a packet dump in progress.
Ping , keystroke: P
•
Enter the IP address in aaa.bbb.ccc.ddd format to ping on the same subnet as CDD-56x unit.
Traceroute , keystroke: A
•
Enter the IP address in aaa.bbb.ccc.ddd format
Command Line Debug Prompt , keystroke: D
•
Enter the password to access the debug command line.
CAUTION
This Command Line Debug Prompt option is reserved for use by qualified Comtech
personnel only.