CDD-562AL/564A/L Multi-Channel Demodulator
Revision 0
HTTP (Web Server) Interface
MN-CDD562AL564AL
10–8
Hos t Acces s L is t
IP (#) / Mask
The
Host Access List
sets which remote clients can connect when the Access List is Enabled.
Each entry sets an IP address and a subnet mask to define a unique class of machines that are allowed
access.
For example, to give access rights to a PC that has an IP Address of 10.10.10.1 and to any PC on a subnet
of 192.168.10.xxx, then the Access List is defined as:
IP 1 / Mask
: 10.10.10.1/32
IP 2 / Mask
: 192.168.10.0/24
An IP address of 0.0.0.0 means the Access List is not defined or is not applicable.
Access List:
Use the
Access List
to give access rights via HTTP and SNMP to a set list of client machines. From the
drop-down list, select
Enable
or
Disable
.
CAUTION
If the Access List is Disabled, then any client machine can connect via HTTP and
SNMP.
When ready, click
Submit
Access
to save and activate these changes.
CAUTION
If you do not save these parameter changes to permanent storage, they will be lost
when the unit is reset or loses power. To save these changes to permanent storage,
go to the Admin | Save page and click Save PaP Parameters.
Summary of Contents for CDD-562AL
