Compliance West HT-5000P, Instruction Manual

Page: 8 / 25

3
If the green Hipot Pass indicator lights, the test cycle has been successfully completed,
meaning there was no dielectric breakdown. If the red Hipot Fail indicator lights, a
breakdown arc has been detected.
High Voltage Discharge
The HT-5000P ac/dc 200mA has an internal circuit designed to remove the high voltage,
after completion of the dielectric withstand test. The HT-5000P ac/dc 200mA should remain
connected to the circuit until the front panel meter shows that the output voltage has dropped to a
safe level.