manualshive.com logo in svg

Compaq ProLiant 5500, Setup And Installation Manual, Page: 47 / 159

Share
Download
Compaq ProLiant 5500 Setup And Installation Manual Download Page 47

3-8

    

Rack-Mount Server Installation

For use with Intel Pentium II Xeon processor-based servers only

Writer: Salvo   Project: Compaq ProLiant 5500 Servers Setup and Installation Guide   Comments: 328470-001\July 1998

File Name: D-CH03.DOC   Last Saved On: 7/6/98 4:04 PM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

■ 

Slotted screwdriver

■ 

Application software diskettes, such as SmartStart and Support Software

■ 

Options to be installed, such as

❏ 

Optional monitor, keyboard, etc.

❏ 

Integrated Management Display (tower model only)

❏ 

Array Controller

❏ 

Redundant fans

Preparing the Mounting Brackets
and Slide Rail Assemblies

Each pair of mounting brackets, with attached slide rail assemblies supports one
rack-mountable server.

Figure 3-2.     Rack mounting brackets; alignment tabs identify the front flanges

Each slide rail assembly consists of an outer bracket rail and an inner server rail
(see the following figure). These pieces can be separated; the bracket rails
attach to the rack mounting brackets (shown in the previous figure), and the
server rails attach to the sides of the server chassis.

Summary of Contents for ProLiant 5500
































































































































































Reviews:

No comments