manualshive.com logo in svg

Compaq ProLiant 5500, Setup And Installation Manual, Page: 43 / 159

Share
Download
Compaq ProLiant 5500 Setup And Installation Manual Download Page 43

3-4

    

Rack-Mount Server Installation

For use with Intel Pentium II Xeon processor-based servers only

Writer: Salvo   Project: Compaq ProLiant 5500 Servers Setup and Installation Guide   Comments: 328470-001\July 1998

File Name: D-CH03.DOC   Last Saved On: 7/6/98 4:04 PM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

Unpacking the Server

Unpack the server box and locate the materials and documentation necessary to
install your rack-mountable server.   

Optional Installation Service

The installation service covers the entire hardware installation from unpacking
the servers to routing the cables and running a test of the system. In the United
States, Compaq will make all of the arrangements to have the rack system
installed by qualified Guaranteed Service Providers. An order form with pricing
is available from PaqFax, the Compaq fax retrieval service.
Call 1-800-345-1518, select PaqFax, and request Document No. 4552.
Installation may also be ordered from and provided directly by Authorized
Compaq Service Providers.

Summary of Contents for ProLiant 5500
































































































































































Reviews:

No comments