7-16
Cabling
For use with Intel Pentium II Xeon processor-based servers only
Writer: Salvo Project: Compaq ProLiant 5500 Servers Setup and Installation Guide Comments: 328470-001
File Name: H-CH07.DOC Last Saved On: 7/13/98 11:24 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Optional SCSI Duplex Configuration
Compaq ProLiant 5500 servers that are optionally configured in the duplex
mode split the hard drive backplane board (duplex board) into two separate
independent SCSI channels. Each channel supports either 4 X 1” or 3 X 1.6”
drives.
Duplex SCSI Channels
In the Compaq ProLiant 5500 server, the duplex board has two SCSI input
channels, designated SCSI Input 0 and SCSI Input 1. These connectors are
shown in Figure 7-11.
2
3
4
1
5
Figure 7-11. Duplex board connectors
➊
SCSI input 1
➋
Duplex board power connector
➌
SCSI Input 0
➍
Removable media power connector
➎
Duplex enabler board
Summary of Contents for ProLiant 5500
Page 8: ......
