1-1
Compaq ProLiant 5500 Servers Setup and Installation Guide
For use with Intel Pentium II Xeon processor-based servers only
Writer: Salvo Project: Compaq ProLiant 5500 Servers Setup and Installation Guide Comments: 328470-001/July 1998
File Name: B-CH01.DOC Last Saved On: 7/6/98 3:56 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Chapter 1
Introduction
Compaq ProLiant 5500
IMPORTANT:
This manual is for Intel Pentium II Xeon processor-based
servers only.
The Compaq ProLiant 5500 server delivers breakthrough performance and
value in a space efficient form factor. Performance is maximized with up to
four Intel Pentium II Xeon Processors, dual peer PCI buses, and up to four
gigabytes of buffered EDO ECC memory. Input/output performance is
enhanced by features such as Wide-Ultra SCSI-3 hard drives.
Compaq ProLiant 5500 servers provide state-of-the-art reliability and high
availability features including support for redundant hot-pluggable power
supplies, redundant fans, redundant NICs, and hot pluggable Wide-Ultra SCSI-
3 drives.
Standard Features
The following features are standard on all Compaq ProLiant 5500, Intel
Pentium II Xeon processor-based servers, unless otherwise noted.
Processor
Compaq ProLiant 5500 servers support up to four Intel Pentium II Xeon
processors with corresponding processor power modules and support for future
Intel Pentium II Xeon processors.
Summary of Contents for ProLiant 5500
Page 8: ......
