Removal and Replacement Procedures
2-34
Compaq ProLiant DL360 Generation 2 Server Maintenance and Service Guide
COMPAQ CONFIDENTIAL
Codename: Maisto Part Number: 233831-001 Last Saved On: 12/12/01 3:47 PM
Processors
The server can support up to two processors. Each processor has an associated Processor
Power Module (PPM) that must be present for proper operation of the server.
Figure 2-30 and Table 2-3 show the location of the processors and PPMs on the system
board.
2
1
4
3
Figure 2-30: Processor and PPM socket locations
Table 2-3: Processor and PPM Sockets
Item Description
PPM socket 1 (must always be populated)
Processor socket 1 (must always be populated)
Processor socket 2
PPM socket 2
Note:
A PPM must be installed with a processor.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal
system components to cool before touching.
CAUTION:
Processor socket 1 must be populated at all times. Failure to follow this process
results in the system failing to boot and halting during the POST. This error will result in the
system not functioning properly.