Removal and Replacement Procedures
Compaq ProLiant DL360 Generation 2 Server Maintenance and Service Guide
2-31
COMPAQ CONFIDENTIAL
Codename: Maisto Part Number: 233831-001 Last Saved On: 12/12/01 3:47 PM
Memory
The ProLiant DL360 Generation 2 server ships standard with two 128-MB Synchronous
DRAM (SDRAM) Dual Inline Memory Modules (DIMMs) installed in DIMM sockets 1 and
2 (Bank A).
Observe the following guidelines when installing additional memory:
•
SDRAM DIMMs must be 133-MHz, registered, 3.3-volt, 72-bit wide, with Error
Correction Code (ECC). No other DIMMS are compatible with the server.
•
Use only 128-, 256-, 512-MB, or 1-GB SDRAM DIMMs. DIMMs must be installed in
pairs and be of the same size.
•
Install DIMMs only in one direction. Be sure to match the notch on the module with the
tab on the DIMM slot. Before seating the DIMM in the slot, ensure that the module key is
fully inserted.
•
Memory can be expanded to a maximum of 4-GB of memory.
•
Use only Compaq SDRAM DIMMs. DIMMs from other sources may affect data
integrity.
•
Install SDRAM DIMM modules one at a time in the sequential order starting with DIMM
socket 1.