INS_RL1000GW_REV– 15 Jul 2016 PAGE 79
INSTALLATION AND OPERATION MANUAL
RL1000GW
TECH SUPPORT: 1.888.678.9427
OSPF Commands Descriptions
Command
Description
Router ospf
enable
Configure terminal
Enter configuration mode
Router ospf
area – OSPF area parameters given in A.B.C.D format or as a metric id (0-4294967295).
router-id – router-id for the OSPF process given in A.B.C.D format.
network – Enable routing on an IP network .
Network can be given as A.B.C.D/M or as a name of a preconfigured interface eth1.<vlan id>.
passive-interface – Suppress routing updates on an interface.
given as a name of a preconfigured interface eth1.<vlan id>.
redistribute – Redistribute information from another routing protocol.
neighbor – Specify a neighbor router. given as A.B.C.D/M .
write – commit and preserve configuration
OSPF setup example
Below setup and configuration will example OSPF based routing between RL1000GW and
RLGE2FE16R routers.
R1 configuration (RLGE2FE16R)
1. remove network ports from default vlan 1
config
vlan 1
no ports fa 0/1-2 untagged fa 0/1-2
exit
