INS_RL1000GW_REV– 15 Jul 2016 PAGE 55
INSTALLATION AND OPERATION MANUAL
RL1000GW
TECH SUPPORT: 1.888.678.9427
Command
Description
VIOLATION_DESCR
The following values are available for MODBUS protocol violations:
“Modbus validity: illegal function”
“Modbus validity: illegal sub-function”
“Modbus validity: illegal encapsulated interface”
“Modbus validity: unknown device ID”
“Modbus validity: illegal quantity “
“Modbus validity: illegal FIFO byte counter”
“Modbus validity: illegal FIFO counter”
“Modbus validity: illegal record number”
“Modbus validity: illegal reference type”
“Modbus validity: illegal byte counter”
“Modbus validity: illegal length of File sub-record”
“Modbus validity: illegal write quantity”,
“Modbus validity: illegal read quantity”
“Modbus validity: illegal File sub-record length”
“Rule violation: not allowed function”
“Rule violation: not allowed sub function”
“Rule violation: out of allowed address range”
“Rule violation: not allowed quantity”
“Rule violation: out of allowed value range”
“Rule violation: not allowed sub function”
“Rule violation: not allowed file number”
“Rule violation: not allowed record number”
“Rule violation: out of allowed READ address range”
“Rule violation: out of allowed WRITE address range”
“Rule violation: not allowed READ quantity”
“Rule violation: not allowed WRITE quantity”
“Rule violation: out of the allowed address range”
“Rule violation: out of the allowed FIFO addresse range”
“Rule violation: out of the allowed encapsulated interface range”
“Rule violation: out of the allowed devise identifiers range”
“Rule violation: out of the allowed object identifiers range”
“Rule violation: address and quantity are out of the allowed range”
“Rule violation: illegal operation”
“Rule violation: inconsistent TCP Unit Identifier”
The following values are available for IEC104/IEC101 protocol violations:
“Iec104 validity: Illegal TypeId field”
“Iec104 validity: Illegal Cause field”
“Iec104 validity: Illegal APCI header”
“Iec104 validity: Illegal Control field 1 in APCI header”
“Iec104 validity: Illegal Control field 2 in APCI header”
“Iec104 validity: Illegal Control field 3 in APCI header”
“Iec104 validity: Illegal Control field 4 in APCI header”
“Iec104 rule validity: Illegal type id, no rule”
The following values are available for DNP3 protocol violations:
“DNP3 validity: Illegal Function Code field”
“DNP3 validity: Illegal Group Id field”
“DNP3 validity: Invalid Object”
“DNP3 validity: Parsing Error”
“DNP3 validity: unused”
“DNP3 validity: unused”
“DNP3 validity: unused”
“DNP3 validity: unused”
“DNP3 validity: MAX”
SLOT_NUMBER
Serial Slot number on ComNet equipment
PORT_NUMBER
Serial port number on ComNet equipment
DATA_MSG_DIR
The field defines data message direction. The following values are available:
“access”,
“network”,
“N/A”
