INS_RL1000GW_REV– 15 Jul 2016 PAGE 42
INSTALLATION AND OPERATION MANUAL
RL1000GW
TECH SUPPORT: 1.888.678.9427
-
exit
+ dhcp {enable | dissable |show}
- enable physical-interface {eth1| eth2}
- disable physical-interface {eth1| eth2}
- show physical-interface {eth1| eth2}
- interface show
- route show
IP Interface Commands Description
Command Description
Router
Enter the router configuration mode
interface
create | remove Add or Remove an IP interface. The configuration should include:
Address-prefix : IP address in the format aa.bb.cc.dd/xx
VLAN: vlan ID for egress packets from the interface
Purpose: application-host or general.
physical-interface: association to the relevant Ethernet port [eth1 |eth2]
mtu: set size in bytes. Default is 1500
description: descriptive text
Static Access the router static mode.
Enable: enable configuration
Disable: disable configuration
Exit: exit to upper level
show running-cofig: static route config
configure terminal
[no] ip route static dest network: a.b.c.d
subnet: 0-32
gateway: a.b.c.d
Show Show application engine IP interfaces
