Comnet reliance RL1000GW, Installation And Operation Manual

Page: 87 / 192

INS_RL1000GW_REV– 15 Jul 2016 PAGE 87
INSTALLATION AND OPERATION MANUAL RL1000GW
TECH SUPPORT: 1.888.678.9427
Command Description
Remove Slot : 1 (constant)
Port : port number .1-2
Service id: numeric value of serial service.
Position:
Master – point to multipoint
Slave – point to multipoint
Application :
Serial-tunnel (default)
Terminal-server
iec101-gw
modbus-gw
show
tunnel settings update low-border-ip-port: define here the range of port number used for tcp/udp connection.
The set number will define the low border range value ‘x’ and result in a permissible range of x
to x+100.
The actual port number which will be used is dependent on the ‘service-id’ value as such:
[‘service-id’+ ‘low-border-ip-port’].
Default value is 9849 which results in port number 9850 for service-id=1.
Changing the default 9849 is permitted to a value higher than 1024.
Remote-end-point Defines the remote end points in a transparent serial tunneling service.
Create remote-address : IPv4 address A.B.C.D
Service id: numeric value of serial service. <1-100.
Position:
Master
Slave
connection mode:
udp – default
tcp
Buffer mode:
byte – default
frame
Remove address : IPv4 address A.B.C.D
Service id: numeric value of serial service.
show