Comnet CNGE2FE24MS, Installation And Operation Manual

Page: 116 / 142

109
show jumbo-frame G Show jumbo frame
enable/disable
switch# show jumbo-frame
Port Commands Set
Netstar Commands Level Description Example
interface fastEthernet
[Portid]
G Choose the port for
modification.
switch(config)# interface
fastEthernet 2
duplex
[full | half]
I Use the duplex
configuration command
to specify the duplex
mode of operation for
Fast Ethernet.
switch(config)# interface
fastEthernet 2
switch(config-if)# duplex full
speed
[10|100|1000|auto]
I Use the speed
configuration command
to specify the speed
mode of operation for
Fast Ethernet, the
speed can’t be set to
1000 if the port isn’t a
giga port.
switch(config)# interface
fastEthernet 2
switch(config-if)# speed 100
flowcontrol
[Enable|Disable]
I Use the flowcontrol
configuration command
on Ethernet ports to
control traffic rates
during congestion.
switch(config)# interface
fastEthernet 2
switch(config-if)# flowcontrol
enable
no flowcontrol I Disable flow control of
interface
switch(config-if)# no flowcontrol
security enable I Enable security of
interface
switch(config)# interface
fastEthernet 2
switch(config-if)# security enable