44
SNTP Configuration interface
IP Security
IP security function allows the user to assign 10 specific IP addresses that have
permission to access the switch through the web browser for the securing switch
management.
IP Security Mode:
When this option is in
Enable
mode, the
Enable HTTP Server
and
Enable Telnet Server
checkboxes will then be available.
Enable HTTP Server:
When this checkbox is ticked, the IP addresses among
Security IP1 ~ IP10 will be allowed to access this switch via HTTP service.
When IP
Security is Enable and this checkbox is not ticked, no user is allowed to login via
HTTP.
Enable Telnet Server:
When this checkbox is ticked, the IP addresses among
Security IP1 ~ IP10 will be allowed to access this switch via telnet service.
When IP
Security is Enable and this checkbox is not ticked, no user is allowed to login via
Telnet.
Security IP 1 ~ 10:
The system allows the user to assign up to 10 specific IP
Summary of Contents for CNGE2FE24MS
