97
Access Control List
Group Id:
Type in the Group ID from 1 to 255.
Action:
Permit and Deny.
VLAN:
Select any or a particular VID.
Packet type:
Select packet type—IPv4 or Non-IPv4
Src IP Address:
Select any or assign an IP address with Subnet Mask for source IP
address.
Dst IP Address:
Select any or assign an IP address with Subnet Mask for
destination IP address.
Ether Type:
Pull down the select menu for Any, ARP or IPX.
IP Fragment:
Set this item as to whether the fragment is checked or not.
L4 Protocol:
Assign the L4 protocol from among ICMP(1), IGMP(2), TCP or UDP.
Current List:
Displays the current list information.
Access Control List interface
Summary of Contents for CNGE2FE24MS
