62
Rate Limiting
All the ports support packet ingress and egress rate control. For example, assume the
wire speed of port 1 is 100Mbps; users can set its effective egress rate as 2Mbps,
ingress rate as 1Mbps. The switch performs the ingress rate by packet counter to meet
the specified rate.
Inrate:
Enter the port effective ingress rate (The default value is “0”).
OutRate:
Enter the port effective egress rate (The default value is “0”).
The rate range for port 1 to 24 is from 1 to 100 Mbps and the rate range for port 25, 26 is
from 1 to 1000 Mbps. The zero means disabled.
Rate Limiting interface
Summary of Contents for CNGE2FE24MS
