Comnet CNGE2FE24MS, Installation And Operation Manual

Page: 117 / 142

110
no security I Disable security of
interface
switch(config)# interface
fastEthernet 2
switch(config-if)# no security
ratelimit in
[Value]
I Set interface input rate
limiting
switch(config)# interface
fastEthernet 2
switch(config-if)# ratelimit in 100
ratelimit out
[Value]
Set interface output
rate limiting
switch(config)# interface
fastEthernet 2
switch(config-if)# ratelimit out 100
show ratelimit I Show interfaces rate
limiting
switch(config)# interface
fastEthernet 2
switch(config-if)# show ratelimit
state
[Enable | Disable]
I Use the state interface
configuration command
to specify the state
mode of operation for
Ethernet ports. Use the
disable form of this
command to disable
the port.
switch(config)# interface
fastEthernet 2
switch(config-if)# state Disable
show interface
configuration
I show interface
configuration status
switch(config)# interface
fastEthernet 2
switch(config-if)# show interface
configuration
show interface status I show interface actual
status
switch(config)# interface
fastEthernet 2
switch(config-if)# show interface
status