Comnet CNGE2FE24MS, Installation And Operation Manual

Page: 123 / 142

116
spanning-tree hello-
time [seconds]
G Use the spanning-tree
hello-time global
configuration command to
specify the interval
between hello bridge
protocol data units
(BPDUs).
switch(config)# spanning-tree
hello-time 3
spanning-tree
forward-time [seconds]
G Use the spanning-tree
forward-time global
configuration command to
set the forwarding-time for
the specified spanning-
tree instances. The
forwarding time
determines how long each
of the listening and
learning states last before
the port begins forwarding.
switch(config)# spanning-tree
forward-time 20
stp-path-cost
[1~200000000]
I Use the spanning-tree cost
interface configuration
command to set the path
cost for Spanning Tree
Protocol (STP)
calculations. In the event
of a loop, spanning tree
considers the path cost
when selecting
an interface to place into
the forwarding state.
switch(config)# interface
fastEthernet 2
switch(config-if)# stp-path-cost
20