79
Trap Configuration
A trap manager is a management station that receives the trap messages generated by
the switch. If no trap manager is defined, no traps will be issued. Create a trap manager
by entering the IP address of the station and a community string. To define a
management station as a trap manager, assign an IP address, enter the SNMP
community strings, and select the SNMP trap version.
IP Address:
Enter the IP address of the trap manager.
Community:
Enter the community string.
Trap Version:
Select the SNMP trap version type—v1 or v2c.
Click
.
To remove the community string, select the community string listed in the current
managers field and click
.
Trap Managers interface
Summary of Contents for CNGE2FE24MS
