manualshive.com logo in svg

CommScope SURFboard SVG2482AC, User Manual, Page: 19 / 66

Share
Download
CommScope SURFboard SVG2482AC User Manual Download Page 19

Chapter 3: Installing the Wi-Fi and voice modem

1. Connect a telephone cord (not included) to the TEL LINE port on your telephone.
2. Connect the other end of the telephone cord to the TEL 1 port on the rear of the

SVG2482AC.

Note: 

 Use the port to connect a two-line telephone. Then, contact a VoIP service

provider to activate your Telephony service TEL 1.

3. Optional: For a second telephone, connect a telephone cord of a single-line telephone to

the TEL 2 port on the rear of the SVG2482AC.

Note: 

 For an Alarm System connection with a single telephone line, connect

the Alarm Panel to the port. If both telephone lines TEL 2 TEL 1 are providing

telephony services, use an RJ-31X adapter (not included) on the port.

4. Check to confirm that your telephone has a dial tone.

Install the battery

The SVG2482AC has battery backup capability for Telephony backup only. Battery usage is

optional. The SVG2482AC battery is available for purchase online at the ARRIS SURFboard

website: 

https://shop.surfboard.com/arris-telephony-modem-back-up-batteries

 .

1. Place the SVG2482AC on its side and locate the battery cover on the bottom of the

device.

2. Press down and pull on the locking tab of the battery cover to remove it.
3. Slide the battery (label side up) with the terminal end first into the battery compartment

until it is fully seated in place.

4. Replace the battery cover with the locking tab facing upward, and then push the cover

until it snaps in place.

Note: 

 It may take up to 12 hours for the battery to reach a full charge.

Establish an Internet connection

Although your client device may already be configured to automatically connect to the

Internet, you should still perform the following connectivity test to check that your devices

were installed properly and are successfully connected to your Wi-Fi home network.
1. Power ON your Wi-Fi enabled device (e.g., laptop, smartphone) connected to the

SVG2482AC if it is turned off, and then log on.

2. Check the front panel LEDs on your SVG2482AC.

During startup, the Power and US/DS (Upstream/Downstream) LEDs will FLASH and then

light up SOLID white. Please note that both Wireless LEDs will blink when your Wi-Fi

enabled device is connected on your home network.

Note: 

 If you are a current voice subscriber with Comcast and purchased the

SVG2482AC, please call Comcast Customer Support at 1-855-OK-BEGIN

(1-855-652-3446) to activate your SVG2482AC.

SURFboard

®

 SVG2482AC Wi-Fi

®

 and Voice Modem for XFINITY

®

 Customers User Guide STANDARD Revision x.5

19

Summary of Contents for SURFboard SVG2482AC



































































Reviews:

No comments