Chapter 3
Installing the Wi-Fi and voice modem
CAUTION:
This product is for indoor use only. Do not route the Ethernet cable(s)
outside of the building. Exposure of the cables to lightning could create a safety
hazard and damage the product.
Connect the SVG2482AC to your client device
Before installing your SVG2482AC:
■
Check with Comcast, your service provider, to ensure that broadband cable service is
available in your area.
To set up a Wi-Fi network, you will need a high-speed Internet connection provided by
Comcast.
Note:
When contacting Comcast, you may need the information listed on the
device label located on the bottom of your SVG2482AC (see Wi-Fi & voice modem
label.
■
Choose a location in your home where your client device and gateway are preferably
near existing cable and electrical wall outlets.
For the best Wi-Fi coverage in your home, a central location in your home or building is
recommended.
Note:
The following installation procedure covers the wired Ethernet connection
process so that you can confirm that the SVG2482AC was properly installed and
can connect to the Internet.
SURFboard
®
SVG2482AC Wi-Fi
®
and Voice Modem for XFINITY
®
Customers User Guide STANDARD Revision x.5
17
