ACP-145 Installation and Administration Manual
3-18
/cpe/cp-145/adm/004 (07/14)
8.
Select the
Close
button in the Response dialog. The Response dialog is
closed, and the Channel Operations dialog is displayed.
9.
Repeat the above steps for the remaining channel. When finished, select
the
Cancel
button in the Channel Operations dialog. The Channel
Operations dialog is closed.
3.2.2.2.2
Default Channel Configuration
To set the ACP-145 Gateway default routing channel, perform the following
steps:
1.
From the ACP-145 Gateway User Interface, select
Default Routings
from the Routing Menu. The Default Routings dialog is displayed.
2.
Enter the channel numbers for the appropriate channel types, JANAP
and XML for the CP-145(L), and X.400 and XML for the CP-145(F).
3.
Select the
OK
button in the Default Routings dialog. The Default
Routings dialog is closed.
3.2.2.2.3
Disk Full Notification Threshold
To set the level at which the ACP-145 Gateway will start notifying the
operator that a full disk threshold is about to be reached, perform the
following steps:
1.
From the ACP-145 Gateway User Interface, select
Preferences
from the
System Menu and then select
Disk Threshold
from the
Preferences
sub-menu. The Disk Threshold dialog is displayed.
2.
In the Low Disk Threshold field, enter a number that represents the level
at which the ACP-145 Gateway will begin generating disk full
notifications (90% is a good default).
3.
Select the
OK
button in the Disk Threshold dialog. The Disk Threshold
dialog is closed.
