Chapter 3. Basic MTA/ACP-145 Configuration
/cpe/cp-145/adm/004 (07/14)
3-13
3.2.1.2.7
Default Classification
27.
Select the
Default Classifications
button in either CP-145
Configuration Utility main window. Enter the default values to be used if
the system is configured to accept Clear and/or Signed Only Messages.
28.
Select the
OK
button to return to the CP-145 Configuration main screen.
3.2.1.2.8
Logging Levels
29.
Select the
Logging Levels
button in either CP-145 Configuration Utility
main window. The Logging Levels window is displayed.
30.
Use the dropdown menu to enter the logging level (Normal, Increased,
or Verbose) individually for the four following modules: Message
Conversion, Input/Output, Retrieval Processor, or Crypto Processor.
31.
Select the
Apply
button to accept the changes and return to the CP-145
Configuration main screen.
NOTE: The next three settings, CP-145 Settings, Security Tables, and
AUTODIN Settings are only configured on the CP-145(L) server.
3.2.1.2.9
CP-145 Settings
32.
Select the CP-145 Settings button in the CP-145(L) Configuration Utility
main window. The CP-145 Settings window is displayed.
33.
Set the Global Domain and MTS Identifiers by entering values for the
Country, ADMD, PRMD, and MTS Local ID entries.
34.
Set the XML NDN Processing to: the OSRI, a Postmaster RI, or to the
MEQ by selecting the corresponding radio button.
35.
Similarly set the JANAP-128 Service Processing to either convert to
XML report or send to MEQ by selecting the corresponding radio
button.
36.
The Gateway DN and OR address are entered by selecting the DN
Name button and the OR Name button..
37.
Select the
OK
button to return to the CP-145(L) Configuration main
screen.
3.2.1.2.10
Security Tables
38.
Select the
Security Tables
button in the CP-145(L) Configuration Utility
main window. The Security Tables window is displayed.
39.
Two sets of Security Tables
are used by the CP-145(L). The first set
translates the ACP-128 Security Label to the ACP-120 Security Label.
Select the first browse button to browse to the location of the SPST,
