ACP-145 Installation and Administration Manual
2-6
/cpe/cp-145/adm/004 (07/14)
2.
Insert the CP-145 Gateway CD and double click on “XML Core
Services 4.0\msxmlcab.exe. This is a redistributable installation
available from Microsoft.
3.
If you agree to the End-User License Agreement select “Yes,” and
browse to the C:\temp\XML folder.
4.
Via a Windows Explorer, go to the C:\temp\XML\msxml4.cab\
folder and highlight the following 4 files:
a.
msxml4.dll
b.
msxml4.inf
c.
msxml4a.dll
d.
msxml4r.dll
5.
Right mouse click over the highlighted files and select extract.
Extract the files to the C:\ WINDOWS \system32\folder.
6.
Open a Command Prompt and enter the following commands:
a.
cd C:\ WINDOWS \system32
b.
regsvr32 msxml4.dll
2.1.1.5
Dot Net Framework Installation
The CP-145 Gateway requires that the Microsoft .NET Framework (English)
v1.1 be installed for all functionality to properly work. To determine if this
software package is installed, look for the following entry in
Start>>Settings>>Control Panel>>Add section /Remove Programs:
Microsoft .NET Framework (English) v1.1
If this entry is found, move to the next. If some other version is installed,
uninstall the current version and follow the steps below listed to install the
required version.
1.
Insert the CP-145 Gateway CD and double click on
“
dotNetFramework\ dotnetredist.exe
”. This is a redistributable
installation available from Microsoft.
2.
Select “Yes” if you agree to the terms of the End-User License
Agreement.
3.
Via a Windows Explorer, browse to C:\Program Files folder and
select “OK”
4.
Select “OK” again and the “dotnetfx.exe” will be extracted to
C:\Program Files\.
5.
Via a Windows Explorer, go to C:\Program Files\ and double click
on “dotnetfx.exe”.
6.
Select “Yes” if asked to install the .NET Framework Package
