ACP-145 Installation and Administration Manual
2-4
/cpe/cp-145/adm/004 (07/14)
2.1.1.2.3
Bootstrap the DSA
When installed with Access Control enabled, the DSA must be
“Bootstrapped” prior to performing the MTA portion of the install. Follow
the steps listed below to Bootstrap the DSA.
1.
Select
Start
>>
All
>>
Programs DC Directory Administrator
and the
Log on to DC Directory Admin – Step 1 of 2
window is displayed.
2.
Select
Next
and the
DC Directory Admin – Step 2 of 2
window is
displayed. Enter the
Directory Service
name as the hostname of the CP-
145(F), set the
Auth Level
to None and then select
Advanced.
3.
Set the
Port
to a value of
104
, select
OK
and the
Finish.
The
DC
Directory Admin
window is displayed.
4.
Select
OK
and the
DC Directory Admin: Configure First Server –
Step 1 of 3
window is displayed.
5.
Enter the logged on user’s password and then select
Next
. The
DC
Directory Admin: Configure First Server – Step 2 of 3
window is
displayed.
6.
Select
Next
and the
DC Directory Admin: Configure First Server –
Step 3 of 3
window is displayed.
7.
Enter the
Administrator Name
as
mtaadmin
and the
Password
as that
of the logged on domain user.
8.
Select
Finish
to display the
DC Directory Admin
window.
9.
Select
File>>Exit
to complete the Bootstrap process.
2.1.1.2.4
MTA Installation
To install the DCL MTA, perform the following steps:
1.
Log onto the system under an account with local administrator privileges.
This must be the same account that was used during the DC
Directory installation.
2.
Insert the installation CD. Via a Windows Explorer, navigate to and
double-click on
DCL MTA\MTA\setup.exe
.
3.
The
DC IMS User Account
window is displayed.
4.
Enter a
Bind Type
of
simple
, an
Account Name
of
/c=us/cn=mtaadmin
and a
Password
of as required. Select
Next
and
the
Administrative Point
window is displayed.
5.
Select
Next
and the installation begins. When complete the
DC IMS is
now ready to run
window is displayed.
6.
Select
OK
to complete the installation.
7.
Reboot the system.
