ACP-145 Installation and Administration Manual
3-16
/cpe/cp-145/adm/004 (07/14)
4.
For the CP-145(L) server only select the correct Channel Devise from
the dropdown menu for each channel.
5.
Once the channels have been configured, select
Install
from the File
Menu in the ACP-145 Gateway Configuration Utility main window. The
changes are installed.
3.2.1.5
Verify/Configure System Variables
For the CP-145(F) server:
1.
From the desktop, select
Start>>Settings>>Control Panel
. The
Control Panel window is displayed.
2.
Double click the
System
icon in the Control Panel window. The System
Properties window is displayed.
3.
Select the
Environment Variables
button on the
Advanced
tab and
verify that the system variables are set as follows:
DCIGWAYERDIR = C:\cpe\dataxch\X400\trans\queues\milX400_err
DCIGWAYINDIR = C:\cpe\dataxch\X400\trans\queues\milX400_iq
DCIGWAYOUTDIR = C:\cpe\dataxch\X400\trans\queues\milX400_oq
If these variables are not set, change them to the values listed above.
4.
Select the
OK
button in the System Properties window and then exit the
Control Panel window.
3.2.2
CP-145 Gateway Online Configuration
Once all of the steps have been performed above in “CP-145 Gateway
Offline Configuration”, the CP-145 Gateway is ready to be started. Once
started, online configuration can be performed.
