IE-MLG-M1200E-01
31
Here you can also allow remote erasing of the alarm memory and
remote deactivation of alarm signalization from the software
COMET Vision
or from the web (
Remote Mute & Erase of Latched
alarms);
moreover, you can permit or forbid alarm deactivation from the
device keyboard (
Local Mute enabled)
. To protect access to these
functions, you can use the PIN2 code (Security panel).
Furthermore, you can allow alarm evaluation here only on certain days
of the week and within defined range of hours per day. It is not suitable
to combine this setup with the above described
Latched alarms
option
.
Alarm events - Mute of signalization
__________________
The
Mute
function is used for deactivating alarm signalization by the
user. It can be optionally applied to audio signalization. It can be
performed from the keyboard or from the software
COMET Vision
. To
protect access to these functions, you can use the PIN2 code, which
the operation personnel must enter. This function deactivates enabled
alarm signalizations until a new alarm occurs. The deactivation can be
permanent (until a new alarm occurs) or temporary (if the alarms
remain active even after selected time out, the signalization is
restored).
Alarm events - Memory occupation
___________________
If you need to indicate exceeding of your specified limit of the data
memory occupation, use the setup in this section. The signalization can
be selected as optical (red LED diode), audio, or by the means of the
ALARM OUT output activation or sending email to selected recipients.
Alarm events - System failure
_______________________
The options in this section allow for setting up the
System alarms
which
respond to the Multilogger or probes malfunction. The signalization can
be selected as optical (red LED diode), audio, or sending email to
selected recipients.
