28
IE-MLG-M1200E-01
General - Preferences
_____________________________
Here you can select language localization (
Language on the device
terminal)
and temperature unit (
Default
temperature unit °C/°F)
.
General - Date and Time
___________________________
Here you can set the date and time in Multilogger (
Date and Time
). In
the device is running the local time. Use
TimeZone
, if you can
determine its relation to UTC. This information will be available for all
timestamps from the device (record, online monitoring). The
Multilogger does not allow for automatic changes between the summer
and winter times.
ATTENTION
- after change the date and time, the
recorded data in the Multilogger will have to be deleted!
General - Advanced - Energy
_______________________
The Multilogger running in the standard mode will measure all inputs
once per second. The advantage is a fast response of the device, the
disadvantage is its higher current consumption if the device is powered
from batteries only. If you operate the Multilogger from batteries for a
long time and you do not need a fast response time, you can use the
energy saving mode (
Energy saving mode
), under which the device
consumption from the batteries will significantly decrease, however,
the measurement interval will be extended to 10 seconds.
Consumption details can be found in the
Technical Information
.
General - Advanced - Device start
___________________
Here you can disable the “Off key” of the device.
