IE-MLG-M1200E-01
27
Device setup using software
Upon being the Multilogger switched on using the red button, the device
begins to take measurements and to record and evaluate alarms according
its user configuration. Complete configuration of the device can be done
using the
COMET Vision
software. Some parameters can be changed from
the device keyboard. When editing the Multilogger configuration, the device
normally works, however, access to some of its functions is limited
(downloading records, editing of the device configuration by other users).
Device configuration basics
Connect the Multilogger with your computer and launch the
COMET Vision
software.
If the software not communicated with this device yet, add Multilogger to
the list of your Comet devices. For more information see part
“CONNECTING THE MULTILLOGER WITH THE COMPUTER”.
If the Multilogger is correctly connected, the
Device Home
panel displays
its current status.
Click on the
Configuration
button. The device configuration is loaded and
you can view or edit it.
When you make a configuration change of any items, the SW goes to the
editing mode and limits the device access for other users now.
Upon a long user inactivity period, the editing configuration mode is
automatically terminated.
Finally, save the new configuration to the Multilogger (
Apply changes
).
Device configuration items
General - Information
______________________________
Here are displayed the basic information about the connected
Multilogger. It includes its name (
Device name
), which is used for
identifying your device and its measured values. The instrument can
be named according to of its application or you can use the default
name. The maximal length of the
Device name
is 32 characters - use
letters, numbers, underscore characters, etc. Moreover, this panel
states the serial number, model name and firmware version.
