6
Installation and Connection of the pizza oven
Safety instructions
WARNING! Electric Shock Hazard!
1.
The unit may be operated only from properly installed electrical outlets with a single touch!
2.
Device can cause injury if not correctly installed!
3.
Prior to installing the data of the local power grid must be compared with the technical specifications of the
device (the type plate)!
4.
Connect the device only in accordance!
5.
Do not unplug the device from the socket with the cord!
6.
The power cable must not come into contact with hot parts!
7.
Make sure that the cable is exposed to heat sources and not in contact with sharp edges!
WARNING! Hot Surface!
During the operation, some parts of the appliance become very hot. To avoid burns, do not touch the hot parts
of the device!
1.
Do not use this appliance if it is not working properly, damaged or dropped to the ground.
2.
Do not use any accessories or spare parts that were not recommended by the manufacturer. This could pose
a danger to the user or cause damage to the equipment and cause personal injury. In addition the warranty
expires.
3.
Do not route cables over carpeting or other heat insulation. Do not cover the cables. Keep the cables away
from work areas and do not submerge in water.
4.
Do not pull the cord for moving the device. Before moving the unit always disconnect the power cord.
5.
Do not wrap the cord around the device and do not bend it.
6.
Protect the device from rain water, humidity and moisture.
7.
During operation do not move and do not tip over the device.
8.
Do not place objects on top of the pizza oven, which could possibly cover the chimney.
ATTENTION!
The installation and maintenance of the equipment must be carried out only by qualified personal!
1.
Unpack the unit and remove all packing material. Peel off the protective cover from the device.
If adhesive residue remains, remove them with a suitable solvent.
2.
To handle the weight of the device place the unit on a flat and safe place which is not heat sensitive.
3.
Do never place the device on a flammable surface (such as: table cloth, carpet, etc.) or in the vicinity of
combustible and flammable materials.
4.
Do not place the unit near open fires, heaters or other heat sources.
5.
Maintain a minimum distance of 20 cm from all sides.
6.
Set the device so that the plug is accessible to disconnect the device quickly from the network if necessary.
