18
Note:
In a machine fed electrically by three-phase, if the rotation of the bowl is opposite the way shown
by the arrow it is necessary to follow these indications for the functioning and every time you change the
electric plug:
-
Stop the machine.
-
Take the plug out.
-
Reverse on the plug the position of two phases (ex. L1 with L2 and vice versa).
-
Restart the machine and verify if the bowl is rotating the right way.
Start the machine without using it, let it on for about one minute and verify that it is functioning perfectly.
MAINTENANCE
1_CLEANING AND MAINTENANCE OF THE MACHINE
The machine requires cleaning before each use.
–
Clean the parts in contact with the mixture, the bowl column and the spiral.
–
Lift the cover of the bowl.
–
Use water, both hot and cold, and normal detergents with the help of a soaked cloth.
–
Remove the washing water using a sponge and dry.
Also ensure that before use the cleaning operations mentioned above were carried out.
C
LEANING OF THE PARTS IN CONTACT WITH THE MIXTURE SHOULD ALWAYS BE CARRIED OUT WITH THE MACHINE OFF
,
WITHOUT MAINS POWER
(
CUT MAINS VOLTAGE
,
I
.
E
.
DISCONNECT THE PLUG
).
The cleaning must be done every time the machine has been used following all the rules to prevent
malfunctioning of the machine and for hygienic purposes. Using a wooden or plastic palate first clean the
residue of dough, then with a soft sponge and warm water accurately clean the pan, the spiral, the dough
breaker and the mobile protection, dry with kitchen paper, then pass over the parts just mentioned then
all the machine with a smooth and cleaned cloth with a specific cleaning products for foods machines.
We recommend not to use any kind of chemical product abrasive or corrosive. Absolutely avoid
using running water, different tools, rough or abrasive objects, metal wool, sponges etc. Which
can damage the surfaces and be dangerous from an hygienic point of view.
To maintain the efficiency and security of the machine it is necessary to proceed with periodical
maintenance (every 6 months) of the following indications:
Summary of Contents for 7485.0078
Page 8: ...8 4_7485 0078 7485 0080 7485 0085 7485 0090 7485 0095 WIRING DIAGRAMS...
Page 9: ...9 4_ 7485 0100 7485 0110 WIRING DIAGRAMS...
Page 22: ...22...
Page 25: ...25...
