ComAp InteliVision 8, Manual

Page: 14 / 96

InteliVision 8
14
Image 3.7 MCB, GCB status
Where
Blue ringlet Opened
Green ringlet closed
Red circle MCB/GCB fail
The breaker status is possible to see also in block diagram in the left side of status bar.
You can also see the breaker in “Power screen”, where a block diagram of a connection type is displayed.
1. Press Measurement button
2. Press Power button (you can find it on the right). see Measurement screens on page 25 . The scheme with
breaker(s) status appears.
Note: The Power button is available only for connection with IGS-NT controller.
3.7 How to change a Gen-set mode?
To change a gen-set mode:
1. Press ControllerMode button at the bottom of IV8 display. Available gen-set modes appear, e.g. TEST,
AUT, MAN, OFF.
Note: Available gen-set modes depend on the type of used application.
2. Select a mode by pressing the appropriate context button. After a while the label above ControllerMode
button will change.