InteliATS
NT
PWR, SW version 2.5, ©ComAp
– May 2015
62
IA-NT- PWR-2.5-Reference Guide.pdf
N
OTE
:
For details on comm. speed and other technical parameters please see chapter Technical Data.
For detail description see chapter Modbus protocol. Register oriented modbus is supported.
ModbusComSpeed
[9600, 19200, 38400, 57600]
If the Modbus mode is selected on COM1 or COM2 channels, the Modbus communication speed in
bps
can be adjusted here.
IBLite IP Addr
[-]
If DHCP is DISABLED this setpoint is used to adjust the IP address of the ethernet interface of the
controller. Ask your IT specialist for help with this setting.
If DHCP is ENABLED this setpoint is used to display the IP address, which has been assigned by the
DHCP server.
IBLite NetMask
[-]
If DHCP is DISABLED this setpoint is used to adjust the IP address NetMask of the ethernet interface
of the controller. Ask your IT specialist for help with this setting.
If DHCP is ENABLED this setpoint is used to display the IP address NetMask, which has been
assigned by the DHCP server.
IBLite GateIP
[-]
If DHCP is DISABLED this setpoint is used to adjust the IP address of the gateway of the network
segment where the controller is connected.
If DHCP is ENABLED this setpoint is used to display the gateway IP address which has been
assigned by the DHCP server.
A gateway is a device which connects the respective segment with the other segments and/or
Internet.
IBLite DHCP
[ENABLED/DISABLED]
The setpoint is used to select the method how the ethernet connection is adjusted.
DISABLED:
The ethernet connection is adjusted manually according to the setpoints
IP Addr
,
NetMask
,
GateIP
,
DNS IP Address
.
This method should be used for classic ethernet or Internet connection. When this type of connection
is opening the controller is specified by its IP address. That means it would be inconvenient if the IP
address were not fixed (static).
ENABLED:
The ethernet connection settings is obtained
automatically from the DHCP
server.
The obtained settings is then copied to the related setpoints.
If the process of obtaining the settings from DHCP server is not successful
the value
000.000.000.000
is copied to the setpoint
IP address
and the
module continues trying to obtain the settings.
ComAp Port
[0 - 65535]
This setpoint is used to adjust the port number, which is used for ethernet connection to a PC with any
of ComAp PC program (i.e. InteliLite, InteliMonitor). This setpoint should be adjusted to 23, which is
the default port used by all ComAp PC programs. A different value should be used only in special
situations as e.g. sharing one public IP address among many controllers or to overcome a firewall
restrictions.
APN Name
[-]
Name of APN access point for GPRS network provided by GSM/GPRS operator.
