travel 600
20
ways). In case of soiling clean the space at the bottom of the travel 600 with a piece of
cloth after taking out the brushes and the vacuuming cylinder.
After changing the brushes and/or the change of the vacuuming cylinder the side covering has to be fixed
with the intended screws.
6.3 Underpressure sensor
The travel 600 checks the underpressure while cleaning. This is usefull for a good suction from the Teav-
elator or escalator profile.
6.4 Pressure sensor
The travel 600 checks the pressure of the Spray pump. This sensor makes a noise if the fresh water tank
is empty [piep
– piep – piep – piep] long interval, the signal button blinks with the same frequency.
6.5 Spray nozzle
In order to check the functioning of the spray nozzles (57) have a look into the spray sector of the spray
nozzles and press button(2).
If the spraying should not work properly it might be necessary to change the spray nozzle. Procede as
follows:
Pressure sensor
Pump
Schlauchanschluss
Unterdrucksensor
Unterdrucksensor
Summary of Contents for Travel 600
Page 26: ...travel 600 26 10 2 Space for your notes...
Page 27: ...travel 600 27...
