Columbus Travel 600, Operating Manual

Page: 15 / 28

travel 600
15
Switch (2) light green
The machine is working and the pump has been activated. The content of the solution tank is being
sprayed on to the travelator/escalator by the pump and the spray nozzles.
Control light (7) for the supply of cleaning solution blinks
The solution tank is empty and has to be refilled. After refilling press switch (2). The control light (7) is no
longer blinking. Then press switch (2) once more in order to activate the pump and spray the cleaning
solution on to the travelator/escalator.
The working hour meter (6) shows the hours the machine has worked. It is only activated if the brushes
of the travel 600 are rotating, i.e. if the machine is in the lowered position.
The EMERGENCY SWITCH-OFF (5) is an important saftety device of the travel 600 and has to be
pressed immediately in cases of emergency. The machine stops immediately.
4.5 Connection scheme
Observe under all circumstances the safety instructions for mains operated machines and connect the
travel 600 as follows:
Complete connection of the travel 600:
(23) Frame travel 600
(24) Power supply
(25) Brush unit
(26) Water filter
(27) Solution tank
(28) Waste-water tank
(29) Guiding bar
It is important to take care that no cables come into the area to be cleaned. Put all supply cables from the
travel 600 backwards.
4.6 Cleaning the travelator/escalator with the travel 600
The machine cleans the travelator/escalator which has always to move to the user of the machine.
For operating the machine one person is necessary who stays at the machine during the whole process
of cleaning. The person’s hands hold the guiding bar all the time.
Immediately use the EMERGENCY SWITCH-OFF of the travelator/escalator and the EMERGENCY
SWITCH-OFF (5) of the travel 600.
In the following a normal cleaning process of a travelator/escalator with the travel 600 is described.
23
27
25
28
26
29
24