travel 600
13
When cleaning ascending travelator/escalators the travel 600 must be operated only on the lower end.
Please always arrange with the operator of the travelator/escalator any necessary changes of the operat-
ing direction or the operating speed. While cleaning the travelator/escalator no changes of the motion
control are possible.
The best cleaning results are obtained at a speed of 0,7 m/s.
4.4 Preparing the machine for work
The preparation has to be done exclusively:
- outside of the moving pavement area and
-
The machine being switched off and fixed with the fixing brake of the guiding wheel
(10).
Disconnect the travel 600 (24) and prevent unauthorized plugging in.
4.4.1
Checking the brushes, vaccuming cylinders
Before each use of the machine control the brushes and the vacuuming cylinders for dirt. Clean or
change these parts if necessary.
4.4.2
Filling in of cleaning solution
Wear appropriate protective gloves when handling the cleaning solution
Take the brand and the ratio of the cleaning solution according to the information of the manufacturer.
Observe all requirements set by the manufacturer of the solution.
Summary of Contents for Travel 600
Page 26: ...travel 600 26 10 2 Space for your notes...
Page 27: ...travel 600 27...
