Notes:
Page 57 of 107
SmartLF Gx Service Manual
8.
Remove the board, making sure to retain the gasket from
between the camera board and housing. The earth lead will
either need to be unsoldered from the board, or if the
replacement board has one attached, will need to be removed
from the other end.
9.
Refit or replace the camera board in the reverse way as it was
taken off. Making sure the gasket is fitted correctly, and that
the earth lead is fitted back on.
10. Realign the cameras as described in the chapter 6.8.2
"Aligning the Gx Cameras" Page 58.
