Colortrac SmartLF Gx/GxT Range Installation and Operating Instructions
PAS161 P/N: P002168 Colortrac Ltd © 2008
12
Once the installation is complete you will be able to locate the
SmartLF program under Program Files > Colortrac > SmartLF.
You have now installed the SmartLF application.
Go to Programs from the Windows Start button and navigate to the
SmartLF entry and release. After a small delay the SmartLF screen
will display. Note that if the scanner is not powered up or the USB2
cable is not connected the software interface will appear grayed as
shown below.
NOTE: The SmartLF application
software is a batch program. Once
started by clicking any one of the 3
main function icons the application will
remain in
ready to load
mode and
scan the next document automatically
as soon as it is fed into the scanner.
To allow a document to be loaded
without
being scanned, re-click or
toggle the active (green arrowhead)
function icon.
17. LOADING A DOCUMENT INTO SMARTLF GX/GXT
Normal thickness documents can be loaded into Gx/GxT center or right justified. Thick documents should always be
loaded into the scanner center justified. All documents should be loaded into the scanner face-down. Use the rollers
as a stop against which to square the document and wait for the scanner to take the document from you. If you need
to re-position the document use the STOP/REW button to withdraw the document.
CENTER
SIDE
Colortrac SmartLF software (included as standard) is restricted
to scanning in industry standard paper sizes, fully automatic
size detect mode or full scan width with auto length detect
mode. SmartLF software does not allow the operator to
specify document sizes in mm or inches.
Auto Length (Max Width) allows the user to scan the full
optical width of the scanner whilst detecting the length of the
document automatically. As soon as the READY status is
displayed (usually after 35 seconds from switching on the
scanner) the first document can be loaded.
SMARTLF WAITING FOR
FUNCTION TO BE SELECTED
WAITING FOR DOCUMENT