Colortrac SmartLF Gx/GxT Range Installation and Operating Instructions
PAS161 P/N: P002168 Colortrac Ltd © 2008
10
WINDOWS ASKS FOR THE DRIVER – INSERT THE CD NOW!
WAIT for a few moments to allow
Windows to start the Hardware
Wizard. The wizard will take you
through the next steps of the
installation. The wizard will respond
by displaying this screen.
NOTE: If the CD is not detected in the next step you will need
to tell the Wizard to search for the drivers automatically by
clicking the first button or direct the search manually by
clicking the second button.
WINDOWS LOCATES AND TRANSFERS THE DRIVER FROM CD
At this point insert the SmartLF Gx/GxT CD containing
the driver. After one or two seconds Windows will
detect the CD and replace the wizard Welcome screen
(STEP2) with the ‘wizard searching’ screen shown
here.
IF THE SMARTLF GX/GXT CD STARTS THE CD
MENU, PRESS EXIT AND ALLOW THE HARDWARE
WIZARD TO CONTINUE INSTALLING THE DRIVER
NOTE: In case of difficulty select ‘I will install the driver myself’ and use ‘Have disk’ to
manually direct Windows to the driver
The Wizard will STOP because the driver is not
recognised by Windows’ logo testing system.
Ignore this and click ‘
Continue Anyway’
This is completely normal.
Windows transfers the driver to the scanner
computer. Do not start other applications while
this is happening.
