AN 06/2003
page
Carry out the following steps prior removal
of the top cover:
1.Train operators of the processor.
2.Switch off the main power switch
(„0“-position) and secure against
restart by locking with a padlock
(see picture below).
Fire Hazards
DRYER COMPARTMENT PRODUCES
HEAT -PAPER OR OTHER COMBUSTI-
BLES CAN BE IGNITED
· Keep the area within 10 feet of the processor
clean.Do not store combustible materials,
including paper, close to the filmprocessor.
· Verify that a functional 10 lb.ABC fire
extinguisher is located closed to the processor.
Burn Hazard
DRYER COMPARTMENT PRODUCES
HEAT -DRYER PANELS AND GUARDS
GET HOT
· Therefore do not touch dryer panels or guards
when dryer in operation
Corrosive Liquids
CHEMICALS MAY IRRITATE EYES,
LUNGS, SKIN AND DIGESTIVE TRACT
# Wear safety goggles,protective gloves and
chemical aprons as indicated on Material
Safety Data Sheets (MSDSs)when handling
chemistry.
# Drain tanks carefully,avoid splashing.
Always drain the system thoroughly before
working on any of the external hose systems.
# Read the MSDSs for more information
regarding the proper safety procedures for
working with photo processing chemicals.
# Do not allow untrained personnel to handle
photo processing chemicals or to operate
the filmprocessor.
# To avoid hazardous situations,keep floors
and floor coverings around the processor and
associated drains clean and dry at all times.
Any accumulation of fluids outside the film
processor, should be cleaned up
immediately
5
Main switch of
the processor
