Cole Parmer Jenway 7410 Instruction Manual Download Page 67

Page: 67 / 68

Declaration of Conformity

This product meets the applicable

harmonized standards for radio frequency

interference and may be expected not to

interfere with, or be affected by, other equipment with

similar qualiﬁcations. We cannot be sure that other

equipment used in its vicinity will meet these standards

and so we cannot guarantee that interference will not

occur in practice. Where there is a possibility that injury,

damage or loss might occur if equipment malfunctions
due to radio frequency interference, or for general

advice before use, contact the manufacturer.

EU Declaration of Conformity

This declaration of conformity is issued under the sole responsibility of the manufacturer

Signed for and on behalf of the above manufacturer

Product

Laboratory Equipment

Manufacturer

Cole-Parmer Ltd

Beacon Road
Stone, Staffordshire
ST15 0SA
United Kingdom

File Number

P231

Authorised

Cole-Parmer

Representative

Beacon Road

Stone, Staffordshire
ST15 0SA
United Kingdom

Object of Declaration

Scanning Spectrophotometer Range - 74 Series

(reference the attached list of catalogue numbers)

The object of the declaration described above is in conformity with the relevant Union Harmonisation Legislation:

Additional Information

Place of Issue
Date of Issue
Authorised Representative
Title
Signature

References to the relevant harmonised standards used or references to the other technical specifications in relation

to which conformity is declared:

IEC/EN 61010-1:2010

Safety requirements for electrical equipment for
measurement, control and laboratory use.
Part 1: General requirements.

Electrical equipment for measurement, control and
laboratory use. EMC requirements.
Part 1: General requirements (Class A).

IEC/EN 61326-1:2013

Low Voltage Directive
EMC Directive
RoHS Directive

2014/35/EU
2014/30/EU
2011/65/EC

Year of CE Marking: 2018

Stone, Staffordshire, UK
21 March 2018
Neil Pomeroy
Technical Director

Declaration of Conformity is also available to view online at www.jenway.com

Summary of Contents for Jenway 7410





































































Search results

Summary of Contents for Jenway 7410

Reviews:

Related manuals for Jenway 7410

Brands by name

Popular brands

Cole Parmer Jenway 7410, Instruction Manual

Search results

Summary of Contents for Jenway 7410

Reviews:

Related manuals for Jenway 7410

Brands by name

Popular brands