CognitiveTPG A776 ColorPOS, Programming Manual

Page: 64 / 180

Chapter 5: Programming commands 52
A776 (B780) Programming Guide A776-PG00001 D 07/13
Set smoothing
ASCII GS b n
Hexadecimal
1D 62 n
Decimal 29 98 n
Value of n : 0 = smoothing off,
1 = smooting on,
default = off
Turns smoothing mode on or off for the quadruple or larger sizes of characters.
Reverse color text mode (ColorPOS
®
)
ASCII
GS 0x85 m n
Hexadecimal 1D 85 m n
Decimal
29 133 m n
Value of m: 0 = white
1 = black
2 = paper color
Value of n:
0 = white
1 = black
2 = paper color
Default: m = 0 (off)
Sets a mode for reverse printing effects on text. The background color is specified by m, while the text color is specified
by n. Setting m = 0 turns off the mode.
If m = n but not zero, the printer produces solid printing in the given color. This tactic can be used to minimize the
firmware busy work.
The value of current color and white/black reserve print mode is superseded by the value of n whenever this mode is
on ( m >0). Bar codes, logos, and bit images are not affected by this command.
Text strike-through mode (ColorPOS
®
)
ASCII
GS 0x85 m n
Hexadecimal 1D 8D n m
Decimal
29 141 n m
Value of m: 0 = retain same color as the character itself
1 = black
2 = paper color
Value of n:
standard cell height
Default: n = 0 (off)
Prints a strike-through over characters. If the strike-through is as wide as the cell height, this will produce a cell that will
be printed as a solid current color.
When characters are greater than normal size, such as double-high, the number of character rows claimed by n also
increases proportionally, such as doubling for double-high cells. Location of the strike-through on a cell is on a cell-by-
cell basis, so mixing cell sizes on the same print row will give uneven results.