CognitiveTPG A776 ColorPOS, Programming Manual

Page: 146 / 180

Chapter 6: DH emulation 134
A776 (B780) Programming Guide A776-PG00001 D 07/13
00
0
NUL Validation Lines/Inch 8.0
10 16 DLE 6.9
20 32 SPACE 6.0
30 48 0 5.3
00 0 NUL Print Self Test NO
40 64 @ (After setting temporary parameters) YES
ALT selects the previous pitch selection.
Reset Printer
Resets and initializes the printer. This command is processed immediately. All data in the buffer is lost. The printer reinitializes
with the default DIP switch settings.
Hexadecimal Decimal ASCII
1B 00
27 0 ESC NUL
Cash Drawer 1
Opens the cash drawer. If a Y-cable is used to split the cash drawer connector so two cash drawers can be connected to
the printer, the cash drawer connected to the first connector (labeled 1 or A) will be opened.
Hexadecimal Decimal ASCII
1B 07 27 7 ESC BEL
Cash Drawer 2
Opens the second cash drawer. If a Y-cable is used to split the cash drawer connector so two cash drawers can be
connected to the printer, the cash drawer connected to the second connector (labeled 2 or B) will be opened.
Hexadecimal Decimal ASCII
1B 08 27 8 ESC BS
Document Clamp Open
Opens the platen. Any forms still in the printer may fall back into the validation station when the platen is opened. This
command enables the Receipt/Journal paper feed and disables the Slip/Validation paper feed.
Hexadecimal Decimal ASCII
1B 0C 27 12 ESC FF
Self Test
Clears all data in the print buffer and prints the current configuration parameters. This functions the same as the
general print test
Hexadecimal Decimal ASCII
1B 13 27 19 ESC DC3
Document Validation
Opens the platen. Once a form is detected, the platen will automatically close. This command enables the Slip/
Validation paper feed and disables the Receipt/Journal paper feed.
Hexadecimal Decimal ASCII
1B 17 27 23 ESC ETB
Receipt/Journal Print
Closes the platen. The 1B 5A version of the command closes the platen when no form has been detected. This
command enables the Receipt/Journal paper feed and disables the Slip/Validation feed.
Hexadecimal Decimal ASCII
1B 1A
27 90 ESC SUB
1B 5A 27 26 ESC Z
Note: The ASCII SUB character cannot be sent by some PC applications. In that case, use the following version of the
Receipt/Journal Print command.