CognitiveTPG A776 ColorPOS, Programming Manual

Page: 112 / 180

Chapter 5: Programming commands 100
A776 (B780) Programming Guide A776-PG00001 D 07/13
Print GS1 DataBar (formerly RSS), null terminated
ASCII
GS k n d1... 00
Hexadecimal 1D 6B n d1... 00
Decimal 29 107 n d1... 00
n Type
51 GS1 DataBar
52 GS1 DataBar truncated
53 GS1 DataBar stacked
54 GS1 DataBar stacked omni-directional
55 GS1 DataBar limited
56 GS1 DataBar expanded and expanded stacked
57 UPC-A
58 UPC-E
59 EAN-13
5A EAN-8
5B UCC/EAN-128 with CC-A or CC-B
5C UCC/EAN-128 with CC-C
Note : Null terminated, data length 1 to 2436
Print multiple barcodes
ASCII GS k
Hexadecimal
1D 6B FF n
Decimal 29 108 255
All the individual barcode strings start with 1D 6B m, where m is the type of barcode. Use the same command to do
multiple barcodes on one line.
1D 6B FF 01 begin multiple barcodes one line
1D 6B FF 00 end multiple barcodes one line, print the barcodes
· Multiple barcodes can be aligned right, left, center same as single line barcodes
· All barcodes on one line printed at same alignment, height, width, and HRI as the first one
· Parameters for alignment, height, width, and HRI can be set before or after 1D 6B FF 01 command
· No height restriction change from single line barcodes
· Quiet zone between barcodes = 10 * module width
· No text in between barcodes (results undefined)
· Upright, picket fence barcodes only, no upside down or ladder. Extended barcode printing for upside down and
ladder barcodes can be done in page mode if required.
· Slip/validation selection disabled in multiple barcodes command string
Continued . . .