CognitiveTPG A776 ColorPOS, Programming Manual

Page: 61 / 180

Chapter 5: Programming commands 49
A776-PG00001 D 07/13 A776 (B780) Programming Guide
Select or cancel italic print
ASCII ESC I n
Hexadecimal
1B 49 n
Decimal 27 73 n
Value of n:
0 = Off
1 = On
(When 0 and 1 are the least
significant bit, LSB)
Default:
0 (Off)
Turns italic print mode on or off.
Italic print mode is available for built-in, user-defined characters. This command only works on the receipt station.
Select international character set
ASCII ESC R n or ESC t n
Hexadecimal
1B 52 n or 1B 74 n
Decimal 27 82 n or 27 116 n
Value of n:
0 = Code Page 437
1 = Code Page 850
2 = Code Page 852
3 = Code Page 860
4 = Code Page 863
5 = Code Page 865
6 = Code Page 858
7 = Code Page 866
8 = Code Page 1252
9 = Code Page 862
0A = Code Page 737, Greek (only in A799 native mode)
0B = Code Page 874 (available for download)
0C = Code Page 857
0D = Code Page 1251
0E = Code Page 1255
0F = Code Page KZ_1048
Default: 0 (Code Page 437)
Selects the character set to be used. Look in “Appendix B: Resident Character Sets” for the character sets.
There are two codes for this command (see select international character set, 1B 74 n ). Both codes
perform the same function.
Exception
The character sets cannot be mixed on the same line.
Related information
This command may also be known as select character code table.
Select character code table
See the previous command, select international character set, 1B 52 n .