CognitiveTPG A776 ColorPOS, Programming Manual

Page: 111 / 180

Chapter 5: Programming commands 99
A776-PG00001 D 07/13 A776 (B780) Programming Guide
Set GS1 DataBar (formerly RSS) parameters
Setting of parameters for GS1 Databar.
ASCII
GS q a b c d e fL fH
Hexadecimal 1D 71 a b c d e fL fH
Decimal
29 113 a b c d e fL fH
a byte
pixels per minimum unit, default 3, minimum 2, maximum 6 (value a applies
to parameters b, c, d)
b byte
X undercut, default 0, can be set 0 to a-1
c byte
Y undercut, default 0, can be set 0 to a-1
d byte separator height, default a, can be set a to a*2
e byte segment width, used only by GS1 DataBar Expanded, default 22, must be
even number 2 to 22
f word line height, used only by UCC128, default 25, can be set 1 to 500
Note: For GS1 DataBar commands, consult ISO/IEC 24724. For further information, visit www.gs1.org.
Print GS1 DataBar (formerly RSS), data length specified
ASCII GS k m nL nH d1... dn
Hexadecimal
1D 6B m nL nH d1... dn
Decimal
29 107 m nL nH d1... dn
m Type
61 GS1 DataBar
62 GS1 DataBar truncated
63 GS1 DataBar stacked
64 GS1 DataBar stacked omni-directional
65 GS1 DataBar limited
66 GS1 DataBar expanded and expanded stacked
67 UPC-A
68 UPC-E
69 EAN-13
6A EAN-8
6B UCC/EAN-128 with CC-A or CC-B
6C UCC/EAN-128 with CC-C
Note : Data length specified 1 to 2436 via integer nH : nL.